We found 16 items for you!
ABS Solvent Cement
ABS (Acrylonitrile Butadiene Styrene) pipe and fittings are ideal for use in pressurised irrigation systems, drinking water, chemical installations and for water treatment. ABS is a solvent welded or threaded pipework system incorporating pipe, fittings and valves that is available in a range of imperial sizes. ABS is lightweight and is extremely easy to install which can save both time and money on any given project when compared to other, more traditional pipework materials.
|
Griffon B-25 ABS Cement /Solvent Glue - 500ml STOCK CODE: ABSSOLVA-SACO0200 |
Boss Green
A potable water pipe jointing compound for drinking water applications. Conforms to BS 6956-5:1992 for hot and cold water, Natural Gas and low pressure steam and temperatures up to 200°C. WRAS approved.
|
Boss Green WRC Approved Pipe Thread Sealant 400ml tub STOCK CODE: BOSSGREEN |
Cable Ties
Nylon cable ties can be used secure bundles of pipe work together within a trench or secure cables together to create a neat and tidy installation.
Supplied in a bag of 100 and available in a variety of sizes
|
Cable Ties Black 100/2.5mm - Nylon 100 Per Pack STOCK CODE: CABTIE15035 |
||
|
Cable Ties Black 200/4.8mm - Nylon 100 Per Pack STOCK CODE: CABTIE20035 |
||
|
Cable Ties Black 300/4.8mm - Nylon 100 Per Pack STOCK CODE: CABTIE27048 |
||
|
Cable Ties Black 370/4.8mm - Nylon 100 Per Pack STOCK CODE: CABTIE39076 |
Blue 6mm Drawcord
6mm Polypropylene rope is ideal alternative for use as a draw cord in ducting to pull through cables or pipe work where required.
|
6mm Blue Polypropylene Drawcord 500 metre coil STOCK CODE: DUCTDRAWCORD500 |
||
|
6mm Blue Polypropylene Drawcord 220 metre coil STOCK CODE: DUCTDRAWCORD-6 |
Tracing Dye
These dyes are soluble in water and used to locate the direction of the flow in pipes and drains.
Dilution:
Clean water one 200gms jar will provide enough dye for approx. 15000 litres (3300 gallons) of water.
Dirty water will require a greater concentration of dye.
|
Bailey 1992 Blue Drain Tracing Dye 200ml STOCK CODE: HT-DYEBLU200 |
||
|
Bailey 3590 Red Drain Tracing Dye 200ml STOCK CODE: HT-DYERED200 |
Electrofusion Wipes
Electrofusion welding wipes are used to clean MDPE or HPPE pipes before being joined by an electrofusion fitting.
Cleaning the pipe work is recommended by all manufacturers to give a solid, fault free installation of the electro fusion fittings. Electrofusion welding wipes - pack of 100
|
Electrofusion Welding Wipes. Tube of 100 STOCK CODE: EFWELDWIPE |
Funke Pipe Lubricant
This Joint Lubricant is a water soluble non-toxic lubricant to allow the easy assembly of all sewer or soil pipes and fittings. Supplied in a 500mm squeezy tube
| STOCK CODE: PIPELUBE500FUN |
Marker Flags
Marker flags are ideal to be used when marking out an irrigation system. They can be used for marking sprinkler head locations, valve boxes etc. Marker flags are usually 100mm x 120mm on a 250mm wire shaft.
|
Marker Flags - 100 Per Bundle Blue STOCK CODE: HT-MARKERFLAG-BLUE |
||
|
Marker Flags - 100 Per Bundle Red STOCK CODE: HT-MARKERFLAG-RED |
||
|
Marker Flags - 100 Per Bundle White STOCK CODE: HT-MARKERFLAG-WHITE |
Marker Paint
Line marker paint 750ml spray can. Used for the marking out of an irrigation system to show pipe work locations before installation. These should also be used to mark out any existing underground installation i.e. mains water supplies, electrical supplies, gas mains etc.
Available in a variety of colours including blue, red, white, yellow
|
Site Marker Paint 750ml Aerosol Can - Blue STOCK CODE: HT-MARKERPAINT-BLU |
||
|
Site Marker Paint 750ml Aerosol Can - Red STOCK CODE: HT-MARKERPAINT-RED |
||
|
Site Marker Paint 750ml Aerosol Can - White STOCK CODE: HT-MARKERPAINT-WHI |
||
|
Site Marker Paint 750ml Aerosol Can - Yellow STOCK CODE: HT-MARKERPAINT-YEL |
PTFE Tape & Pastes
Standard PTFE tape is used for sealing threaded pipe joints. Ideal for installation of pumps and threaded manifolds using metal or plastic threaded fittings. Made to BS5292 standard. As an alternative, we offer a PTFE paste for all threaded fittings, but this should not be used on potable water applications.
|
Loctite 55 PTFE Thread Sealing Cord 160m STOCK CODE: PTFE-LOCTITE55 |
||
|
Lake City Thread Sealant Paste ½ Pint (237ml) STOCK CODE: PTFEPASTE |
||
|
PTFE Tape 12 metres x 12mm x 0.075mm STOCK CODE: PTFETAPE |
PVC & ABS Pipe Cleaner
PVC/ABS Solvent cleaner is used to clean the pipe and fittings before using a glue to fix the installation. Cleaner is used to make sure the pipe work or fittings are clean and create a faultless and lasting cement weld on the pipe work to give a long lasting and reliable installation.
|
SABA SABAClean solvent cleaning agent suitable for PVC/ABS - 650ml STOCK CODE: PVC1CLEANER0650 |
PVC Solvent Cement
PVC cement is for use with PVC fittings and pipe work. If used according to the manufacturers instructions it will create a long lasting and reliable solvent welded joint between all fittings and pipe work.
Generally PVC cement can only be used on dry installations, but Wet 'R Dry Solvent Cement can be used in wet conditions.
All pipework and fittings should be cleaned with a suitable PVC solvent cleaner prior to jointing to remove any contaminants that will affect the integrity of the joint.
|
Astore PVC Cement - Solvent Glue - 500ml STOCK CODE: ASTSOLVP-RPCO0200 |
||
|
Griffon UNI-100 XT PVC Cement / Solvent Glue with Brush - 500ml STOCK CODE: PVC1GLUEGRIFFIN0500 |
||
|
Weld-On Wet 'R Dry 725 PVCu Cement / Solvent Glue - 250ml STOCK CODE: PVC1GLUEWETNDRY0250 |
||
|
Weld-On Wet 'R Dry 725 PVCu Cement / Solvent Glue - 500ml STOCK CODE: PVC1GLUEWETNDRY0500 |
We found 16 items for you!