Loading...
Nest 0 Basket
You have no items in your shopping basket.
Sort by :
Display per page:

We found 5 items for you!

DAB DIVERTEK Multistage Pump

The DAB Divertek is a submersible multi-impeller (2 or 3) pump for clean water, designed to increase water pressure for rainwater reuse, gardening and irrigation in residential building service. Divertek is ideal for use in rainwater recovery systems and for drawing water from a cistern or a tank.

There are manual and float switch operated versions available. The float switch provides protection against dry running. A control panel to provide overload protection is advisable, but it does NOT start/stop automatically on pressure ( see DAB Divertron). Thermal protection is incorporated and the starting capacitor is integrated and accessible without disassembling the pump.

The Divertek pumps are equipped with a retractable carrying handle, a technopolymer anti-debris filter, a non-return valve, and a 15-meter power cable with a Schuko plug. The outlet is 1" BSP with a four-section fitting to 1" BSP male/1" hosetail/¾" BSP male/¾" hosetail supplied as standard.

DAB Divertron

The DAB Divertron 6" multistage submersible pump comes with a roller ball float switch and a built-in pressure switch. The motor is IP68 rated and mounted in the top of the pump, thus cooled by pumped liquid. Built-in thermal and current overload protection. Supplied with 15 meters of cable.

The Pump is available with 3 or 4 impellers allowing for different pressure ratings but similar flow rates across the range. They are ideal for pumping clean water for pressure boosting, irrigation systems, water transfer and water supply applications.

Constructed from anti-corrosive and rust-proof materials with an anti-debris stainless steel strainer and supplied with a non-return valve. The Divertron range is also available with a floating suction inlet, which also makes it suitable for rainwater harvesting applications

DAB E.SYBOX Diver

7” multi-stage electronic pump with variable speed drive for clean water designed for use in wells, cisterns or tanks. The pump can be used submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for pressurization, reuse of rainwater, gardening activities and irrigation in residential building service.

DAB Pulsar

The Dab Pulsar pump is a 5" multistage submersible pump that comes with a roller ball float switch. The motor is IP68 rated and mounted in the top of the pump, thus cooled by pumped liquid. Built-in thermal and current overload protection. Supplied with 20 meters of HO7-RNF cable.

Designed to be installed directly in a tank or borehole this eliminates any problems with suction and priming if the pump. With the multiple options within the DAB Pulsar range supplying different flows and pressure there is always one suitable for you pressure boosting, irrigation system, water transfer or water supply application.

The DAB Pulsar is constructed from AISI 304 stainless steel for the outer liner, stator sleeve, upper head with delivery connection and closing ring, the rotor shaft is also constructed for AISI 304 stainless steel, The impellers are constructed from abrasion proof thermoplastic.

DAB PULSAR 30/50MA 0.55kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR30-50MA SKU: 104160000

DAB PULSAR 30/80MA 0.75kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR30-80MA SKU: 104160230

DAB PULSAR 40/50MA 0.75kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR40-50MA SKU: 104160030

DAB PULSAR 40/80MA 1.0kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR40-80MA SKU: 104160260

DAB PULSAR 50/50MA 1.0kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR50-50MA SKU: 104160060

DAB PULSAR 50/80MA 1.2kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR50-80MA SKU: 104160290

DAB PULSAR 65/50MA 1.2kW 230/1/50Hz 5" submersible pump c/w float

DABPULSAR65-50MA SKU: 104160090

DAB Pulsar Dry

The Dab Pulsar pump is a 5" multistage submersible pump that comes with a 1¼" female threaded inlet for a floating suction. The motor is IP68 rated and mounted in the top of the pump, thus cooled by pumped liquid. Built-in thermal and current overload protection. Supplied with 20 meters of HO7-RNF cable.

Designed to be installed directly in a tank or borehole this eliminates any problems with suction and priming if the pump. With the multiple options within the DAB Pulsar range supplying different flows and pressure there is always one suitable for you pressure boosting, irrigation system, water transfer or water supply application.

The DAB Pulsar is constructed from AISI 304 stainless steel for the outer liner, stator sleeve, upper head with delivery connection and closing ring, the rotor shaft is also constructed for AISI 304 stainless steel, The impellers are constructed from abrasion proof thermoplastic.

The Dab Pulsar Dry pump also includes a threaded inlet to allow the attachment of a floating suction kit, making them ideal for installing in a rainwater harvesting system.

We found 5 items for you!