Landscape Watering Systems Limited. Galvanised Fittings

Galv Bend 45° M x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 156 galv iron 45° male / female Bend to BS143/BS1256 MIGBEND45015
¾" Fig 156 galv iron 45° male / female Bend to BS143/BS1256 MIGBEND45020
1" Fig 156 galv iron 45° male / female Bend to BS143/BS1256 MIGBEND45025
2" Fig 156 galv iron 45° male / female Bend to BS143/BS1256 MIGBEND45050

Galv Bend 90° F x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF015
¾" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF020
1" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF025
1¼" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF032
1½" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF040
2" Fig 193 galv iron female / female Bend to BS143/BS1256 MIGBENDFF050

Galv Bend 90° M x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 192 galv iron male / female Bend to BS143/BS1256 MIGBENDMF015
¾" Fig 192 galv iron male / female Bend to BS143/BS1256 MIGBENDMF020
1" Fig 192 galv iron male / female Bend to BS143/BS1256 MIGBENDMF025
1¼" Fig 192 galv iron male / female Bend to BS143/BS1256 MIGBENDMF032
1½" Fig 192 galv iron male / female Bend to BS143/BS1256 MIGBENDMF040

Galv Bend 90° M x M BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

2" Fig 191 galv iron male / male Bend to BS143/BS1256 MIGBENDMM050

Galv Reducing Bush M x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" x ¼" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH015008
¾" x ¼" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH020008
¾" x ½" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH020015
1" x ½" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH025015
1" x ¾" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH025020
1¼" x ¾" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH032020
1¼" x 1" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH032025
1½" x ¾" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH040020
1½" x 1" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH040025
1½" x 1¼" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH040032
2" x 1" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH050025
2" x 1¼" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH050032
2" x 1½" Fig 140 galv iron Hexagon Bush to BS143/BS1256 MIGBUSH050040

Galv Cap

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 185 galv iron Cap to BS143/BS1256 MIGCAP015
¾" Fig 185 galv iron Cap to BS143/BS1256 MIGCAP020
1" Fig 185 galv iron Cap to BS143/BS1256 MIGCAP025
1½" Fig 185 galv iron Cap to BS143/BS1256 MIGCAP040
2" Fig 185 galv iron Cap to BS143/BS1256 MIGCAP050

Galv Cross

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 171 galv iron Cross to BS143/BS1256 MIGCROSS015
¾" Fig 171 galv iron Cross to BS143/BS1256 MIGCROSS020
1" Fig 171 galv iron Cross to BS143/BS1256 MIGCROSS025
1½" Fig 171 galv iron Cross to BS143/BS1256 MIGCROSS040
2" Fig 171 galv iron Cross to BS143/BS1256 MIGCROSS050

Galv Elbow 45° F x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45015
¾" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45020
1" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45025
1¼" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45032
1½" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45040
2" Fig 155 galv iron 45° female Elbow to BS143/BS1256 MIGELB45050

Galv Elbow 90° F x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

¼" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF008
½" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF015
¾" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF020
1" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF025
1¼" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF032
1½" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF040
2" Fig 151 galv iron female Elbow to BS143/BS1256 MIGELBFF050

Galv Elbow 90° M x F BSP

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

¼" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF008
½" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF015
¾" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF020
1" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF025
1¼" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF032
1½" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF040
2" Fig 152 galv iron male / female Elbow to BS143/BS1256 MIGELBMF050

Galv Hexagon Nipple

Galvanized malleable iron pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they have BSI Kitemark approval and conform to BS EN 10242 and have UL approval.

All threaded fittings are BSP standards and generally will be to BS EN 10226-2 and BS 21 taper threaded male and taper threaded female, with some exceptions depending on availability where the female fitting may be parallel threaded.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP015
¾" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP020
1" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP025
1¼" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP032
1½" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP040
2" Fig 144 galv iron hexagon Nipple to BS143/BS1256 MIGHEXNIP050

Galv Long Nipple

Galvanized mild steel pipe fittings are hot-dipped in zinc prior to machining, making them more resistant to corrosion.

Generally they conform to BS EN 10241.

All threaded fittings are BSP standards and generally will be taper threaded male and parallel threaded female, with some exceptions such as long screws and running nipples.

Generally, all threaded fittings are suitable for a pressure up to 25 bar, subject to the connecting pipe material, the threaded joint and the sealant used.

All fittings are available as black (non-galvanised) if required.

½" galv Longscrew with socket and backnut to BS1387 MIGLONG015
¾" galv Longscrew with socket and backnut to BS1387 MIGLONG020
1" galv Longscrew with socket and backnut to BS1387 MIGLONG025
1¼" galv Longscrew with socket and backnut to BS1387 MIGLONG032
1½" galv Longscrew with socket and backnut to BS1387 MIGLONG040
2" galv Longscrew with socket and backnut to BS1387 MIGLONG050

Galvanised Fittings

Refine by