We found 18 items for you!
Pressfit Adaptor Female
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit adaptors have a female crimp joint one end and a BSP female outlet with parallel thread (Rp) on the other.
|
15mmx½" 316L Stainless Steel Pressfit Female BSPP Adaptor. EPDM seal. WRAS STOCK CODE: PRESSSADAPTF015015 |
||
|
15mmx¾" 316L Stainless Steel Pressfit Female BSPP Adaptor. EPDM seal. WRAS STOCK CODE: PRESSSADAPTF015020 |
||
|
22mmx¾" 316L Stainless Steel Pressfit Female BSPP Adaptor. EPDM seal. WRAS STOCK CODE: PRESSSADAPTF022020 |
||
|
28mmx1" 316L Stainless Steel Pressfit Female BSPP Adaptor EPDM Seal. WRAS. STOCK CODE: PRESSSADAPTF028025 |
||
|
35mmx1¼" 316L Stainless Steel Pressfit Female BSPP Adaptor EPDM Seal. WRAS. STOCK CODE: PRESSSADAPTF032032 |
||
|
42mmx1½" 316L Stainless Steel Pressfit Female BSPP Adaptor. EPDM seal. WRAS STOCK CODE: PRESSSADAPTF042040 |
||
|
54mmx2" 316L Stainless Steel Pressfit Female BSPP Adaptor. EPDM seal. WRAS STOCK CODE: PRESSSADAPTF054050 |
Pressfit Adaptor Male
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit adaptors have a female crimp joint one end and a BSP male outlet with taper thread (R) on the other.
Pressfit Bridge
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available for all major hire shops.
Bridge fittings have two plain spigot ends only
|
15mm 316L Stainless Steel Pressfit Male/Male Bridge. WRAS STOCK CODE: PRESSSBRIDGE015 |
||
|
22mm 316L Stainless Steel Pressfit Male/Male Bridge. WRAS STOCK CODE: PRESSSBRIDGE022 |
||
|
28mm 316L Stainless Steel Pressfit Male/Male Bridge. WRAS STOCK CODE: PRESSSBRIDGE028 |
Pressfit Cap
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available for all major hire shops.
Pressfit caps are used to terminate pipe ends
|
28mm 316L Stainless Steel Pressfit End Cap. EPDM seal. WRAS STOCK CODE: PRESSSCAP028 |
||
|
54mm 316L Stainless Steel Pressfit End Cap. EPDM seal. WRAS STOCK CODE: PRESSSCAP054 |
Pressfit Coupler
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit couplers are used to join two lengths of pipe.
|
15mm Stainless Steel 316L Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP015 |
||
|
22mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP022 |
||
|
28mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP028 |
||
|
35mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP035 |
||
|
42mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP042 |
||
|
54mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP054 |
||
|
76.1mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP076 |
||
|
88.9mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP088 |
||
|
108mm 316L Stainless Steel Pressfit Coupling. EPDM seal. WRAS STOCK CODE: PRESSSCOUP108 |
Pressfit Elbow Female 45°
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit 45° elbows have 2 x female pressfit joints
|
15mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45015 |
||
|
22mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45022 |
||
|
28mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45028 |
||
|
35mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45035 |
||
|
42mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45042 |
||
|
54mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45054 |
||
|
76.1mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45076 |
||
|
88.9mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45088 |
||
|
108mm 316L Stainless Steel Pressfit 45° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF45108 |
Pressfit Elbow Female 90°
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit 90° elbows have 2 x female pressfit joints
|
15mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90015 |
||
|
22mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90022 |
||
|
28mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90028 |
||
|
35mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90035 |
||
|
42mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90042 |
||
|
54mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90054 |
||
|
76.1mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90076 |
||
|
88.9mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90088 |
||
|
108mm 316L Stainless Steel Pressfit 90° Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBFF90108 |
Pressfit Elbow Male 45°
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit 45° male x female elbows have 1 x female pressfit joint and 1 x male plain spigot end
|
15mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45015 |
||
|
22mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45022 |
||
|
28mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45028 |
||
|
35mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45035 |
||
|
42mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45042 |
||
|
54mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45054 |
||
|
76.1mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45076 |
||
|
88.9mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45088 |
||
|
108mm 316L Stainless Steel Pressfit 45° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF45108 |
Pressfit Elbow Male 90°
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit 90° male x female elbows have 1 x female pressfit joint and 1 x male plain spigot end
|
15mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90015 |
||
|
22mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90022 |
||
|
28mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90028 |
||
|
35mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90035 |
||
|
42mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90042 |
||
|
54mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90054 |
||
|
76.1mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90076 |
||
|
88.9mm Stainless Steel Pressfit 90° Male/Female Elbow. EPDM Seal. WRAS. PN16 STOCK CODE: PRESSSELBMF90088 |
||
|
108mm 316L Stainless Steel Pressfit 90° Male/Female Elbow. EPDM seal. WRAS STOCK CODE: PRESSSELBMF90108 |
Pressfit Flange Adaptor PN16
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit flange adaptors have a DIN PN16 flange face for bolting to a similar flanged fitting and a female pressfit joint
|
DN15x15mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG015 |
||
|
DN20x22mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG022 |
||
|
DN25x28mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG028 |
||
|
DN32x35mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG035 |
||
|
DN40x42mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG042 |
||
|
DN50x54mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG054 |
||
|
DN65x76.1mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG076 |
||
|
DN80x88.9mm 316L Stainless Steel Pressfit PN16 Flange Coupling. EPDM Seal. WRAS STOCK CODE: PRESSSFLG088 |
||
|
DN100x108mm 316L Stainless Steel Pressfit PN16 Flanged Coupling. EPDM seal. WRAS STOCK CODE: PRESSSFLG108 |
Pressfit Reducing Coupler
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit male x female reducing couplers have 1 x female pressfit joint (the smaller fitting size) and 1 x male plain spigot (the larger fittings size)
Pressfit Reducing Tee
Our range of 316L WRAS approved GDPress® Stainless Steel pressfit fittings are very competively priced against the major pressfit fitting manufacturers. They should be used with standard EN10312 metric 316L annealed stainless steel tube. A pressfit tool with M-type jaws should be used to crimp the fittings, and are available from all major hire shops.
Pressfit reducing tees have the reduced size fitting on the side branch only, and all ends have pressfit crimp joints
We found 18 items for you!