The Arad MS Series domestic/agricultural/irrigation/industrial water meters use the multi-jet principle for the best cost/performance ratio and long life.
Wide clearances in the measuring chamber and negligible area of contact between static and moving parts are the main reasons for the high reliability of this design even in hard water.

​Fitted with a pulse output - K10 - 10 litre per pulse

Standards
MID 2014/22/EC (based on OIML R49 EN 14154 and ISO 4064:2014),
WRAS approved

Installation Requirements
The Meter should be installed in horizontal position dial face up.
Pipeline must be flushed before installation.
The meter should be constantly full of water.

The water meters are supplied complete with a set of brass union meter tails
Please note - the water meter thread size is based on the brass tail connection BSP sizing. The connection thread on the body of the meter is usually one size larger